Bully Dog 51203-99 Rapid Flow Induction (RFI) Cold Air Intake User Manual
Page 2

1
RFI COLD AIR INTAKE
Introduction
This manual provides step-by-step installation instructions for
the Bully Dog Rapid Flow Induction (RFI) Cold Air Intake for
2010-2013 Ford 6.2L F150 Raptor trucks. Installation requires
a few basic tools and takes about 20 minutes.
Table of Contents
Parts .....................................................................1-4
Installation ............................................................5-13
Maintenance ........................................................14-15
Parts Included
RFI Lid ..................................................................(
51200-1
)
MAF Tube .............................................................(
51201-3
)
Stage 2 Air Intake Tube ........................................(
51203-3
)
Air Filter with Band Clamp ...................................(
224900
)
9.5 mm Silicone Hose ..........................................(
51202-7
)
16 mm Silicone Hose ...........................................(
51201-6
)
Silicone Coupler – 57 mm ....................................(
51200-5
)
Silicone Coupler – 76 mm ....................................(
51200-6
)
#6
Hose Clamp (2) ................................................(
10800-2
)
#8 Hose Clamp (2) ...............................................(
10800-4
)
4″ Worm Drive Band Clamp (4) ............................(
51105-7
)
T20 Security Torx® Bit .........................................(
229120
)
Black Oxide Phillips Screw (2) ..............................(
54100-94
)
Nylon Washer (2) ..................................................(
51201-94
)
Tools Needed
• Flat-head screwdriver
• Phillips screwdriver
• Bit driver
• 10 mm socket