beautypg.com

Intake installation, Installation – Bully Dog 52102 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 11

background image

10

Intake Installation

Installation

1. Install the coupler with the band clamps onto the turbo inlet. The smaller band clamp goes to the turbo

connection and the larger band clamp is for the tube connection. Do not tighten band clamps yet.

2. Install the Bully Dog box/tube assembly. Guide
the tube into the coupler along with the pegs into
the stock grommets. Install the Bully Dog box arm
with the grommet in it onto the stock connection.
Secure the arm on the Bully Dog Box with the
10mm stock nut .