Bully Dog 51205 Rapid Flow Induction (RFI) Cold Air Intake User Manual
Page 2
1
RFI COLD AIR INTAKE
Introduction
This manual provides step-by-step installation instructions for
the Bully Dog Rapid Flow Induction (RFI) Cold Air Intake for the
2012-2014 Ford 3.5L EcoBoost F150. Installation requires a
few basic tools and takes about 20 minutes.
Table of Contents
Parts .....................................................................1-3
Installation ............................................................4-8
Maintenance ........................................................9-10
Parts Included
RFI Lid ..................................................................(
51200-1
)
Air intake Tube .....................................................(
51205-3
)
Silicone Coupler – Hump, 80 mm ........................(
51202-6
)
Silicone Coupler – Hump, 100 mm ......................(
51202-5
)
4″ Worm Drive Band Clamp (2) ............................(
51105-7
)
4.5″ Worm Drive Band Clamp (2) .........................(
53252-7
)
Air Filter with Band Clamp ...................................(
224900
)
Black Oxide Phillips Screw – 5/8″ Pan Head .......(
51205-94
)
Black Oxide Flat Washer ......................................(
51205-95
)
Tools Needed
• Flat-head screwdriver
• Phillips screwdriver
• 4 mm socket