beautypg.com

Rfi cold air intake, Installing the rfi intake – Bully Dog 52103 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 10

background image

9

RFI COLD AIR INTAKE

b. Place the pegs in the rubber grommets.
c. Secure the RFI base support arm to the vehicle

frame.
• 2007-2009: Use the stock nut set aside on step 6

(page 7).

• 2010-2012: Use the spacer, washer and nut

provided by Bully Dog.

2. Connect the RFI tube to the turbo coupler. (Use a

flat-head screwdriver; this connection is hard to reach,

so you may need to use a short one.)

IMG_1060-1

5. Install the MAF and temperature sensors on the RFI

tube. (Use the black oxide screws and a Phillips

screwdriver.)

Installing the RFI Intake

1. Install the RFI base assembly.

a. Mount the base in the engine bay space where the

stock intake box sat.

IMPORTANT: Do not overtighten the screws, as this could damage the MAF sensor.

See also other documents in the category Bully Dog For the car: