Bully Dog 53105 Rapid Flow Induction (RFI) Cold Air Intake User Manual
Page 2
1
RFI COLD AIR INTAKE
Introduction
This manual provides step-by-step installation instructions
for the Bully Dog Rapid Flow Induction (RFI) Cold Air Intake
for 2001-2004 GM 6.6L Duramax LB7 vehicles. Installation
requires a few basic tools and takes about 20 minutes.
Table of Contents
Parts ................................................................... 2-4
Installation .......................................................... 5-11
Maintenance ...................................................... 12-13
Parts Included
RFI Lid ..................................................................(
53104-1
)
RFI Base ...............................................................(
53104-2
)
RFI Tube ...............................................................(
53202-3
)
Stage 2 RFI Tube .................................................(
53105-3
)
Air Filter with Band Clamp ...................................(
224800
)
110 mm Silicone Coupler.....................................(
53105-4
)
93 mm Silicone Coupler.......................................(
53252-5
)
5” Worm Drive Band Clamp (2) ............................(
51104-7
)
4.5” Worm Drive Band Clamp (2) .........................(
53252-7
)
Black Oxide Phillips Screw (2) ..............................(
54100-94
)
Nylon Washer (2) ..................................................(
51201-94
)
T20 Security Torx® Bit .........................................(
229120
)
T30 Security Torx® Bit .........................................(
53105-98
)
MAF Sensor Gasket .............................................(
53105-95
)
Tools Needed
• Flat-head screwdriver
• Phillips screwdriver
• 10 mm socket
• Socket extension
(optional)