Bully Dog 53106 Rapid Flow Induction (RFI) Cold Air Intake User Manual
Page 2
1
RFI COLD AIR INTAKE
Introduction
This manual provides step-by-step installation instructions
for the Bully Dog Rapid Flow Induction (RFI) Cold Air Intake
for 2004.5-2006 GM 6.6L Duramax LLY vehicles. Installation
requires a few basic tools and takes about 20 minutes.
Table of Contents
Parts ................................................................... 2-4
Installation .......................................................... 5-11
Maintenance ...................................................... 12-13
Parts Included
RFI Lid ..................................................................(
53104-1
)
RFI Base ...............................................................(
53104-2
)
RFI MAF Tube ......................................................(
53106-3
)
Stage 2 RFI Tube .................................................(
53106-4
)
Air Filter with Band Clamp ...................................(
224800
)
Silicone Coupler – Straight ..................................(
51200-6
)
Silicone Coupler – Hump .....................................(
53104-12
)
4” Worm Drive Band Clamp (2) ............................(
51005-7
)
5” Worm Drive Band Clamp (2) ............................(
51104-7
)
T20 Security Torx® Bit .........................................(
229120
)
3
/
8
” Black Oxide Phillips Screw (2) ........................(
54100-94
)
Nylon Washer (2) ..................................................(
51201-94
)
MAF Sensor Gasket .............................................(
53105-95
)
Tools Needed
• Flat-head screwdriver
• Phillips screwdriver
• 10 mm socket