beautypg.com

Rfi cold air intake – Bully Dog 53153 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 7

background image

6

RFI COLD AIR INTAKE

2. Unplug the mass air flow sensor.

3. Use a flat-head screwdriver to loosen the band clamps

located at each end of the stock intake tube. You do not

need to completely disconnect the clamps, just loosen them

enough to remove the tube.

4. Remove the stock intake tube and set it aside. You will need

it later when preparing the Bully Dog RFI Cold Air Intake for

installation.

5. Remove the OEM intake box. The OEM box is held in place

by rubber grommets, so it will easily pop out if you gently

pull upward.