Bully Dog 40620 Case IH 8.3L CAPS Module - Manual (Page 7)

6
8. Insert module female plug into fuel rail pressure
sensor.
9. Connect the module male plug to the tractor female
plug.
10. Use zip ties to secure the Rapid Power cable to the
tractor wiring harness. Be sure the cable will be safe
from moving parts (such as the starter/flywheel) or hot
exhaust system parts. Zip tie the module box to the
cable harness as shown.
Fuel Sensor Female Plug
Module Male Plug
Module Female Plug
Fuel Sensor Male Plug
rPm inSTAllATiOn
Tractors Stock Low Power Level
Total Horsepower
High Power Level
Total Horsepower
MX 240 205 HP ~226 ~246
MX 255 215 HP ~237 ~258
MX 270 235 HP ~259 ~282
MX 285 240 HP ~264 ~288
STX 275 225 HP ~248 ~270
STX 325 T 270 HP ~297 ~324
This chart illustrates the approximate power increase when the Rapid Power
Module is set at the desired power level.~ Denotes an approximate value.
Warning: Do not remove
module while tractor is
running. Shut down machine
and then remove module.