Bonide TOTAL Pest Control-Indoor Conc. User Manual
Page 7
OUTDOOR PEST CONTROL
Do not water the treated area to the point of run-off.
Do not make applications during rain. All outdoor
applications must be limited to spot or crack-and-crevice
treatments only, except for the following permitted uses:
(1) Treatment to soil or vegetation around structures;
(2) Applications to lawns, turf, and other vegetation;
(3) Applications to building foundations, up to a
maximum height of 3 feet.
Other than applications to building foundations, all
outdoor applications to impervious surfaces such as
sidewalks, driveways, patios, porches and structural
surfaces (such as windows, doors, and eaves) are
limited to spot and crack-and-crevice applications only.
Pests on Outside Surfaces of Buildings: Use
this product to control ants, clover mites, crickets,
earwigs, millipedes and sowbugs (pillbugs) on
the outside surfaces of buildings. To help prevent
infestation of buildings, treat the building foundation
to a height of 2 to 3 feet where pests are and may
find entrance. Also, apply as a spot treatment to
outside surfaces of buildings, including porches,
screens, window frames, eaves, patios, garages,
refuse dumps, and other areas where these pests
congregate or have been seen.
House Flies, Mosquitoes, Cluster Flies, Gnats,
Flying Moths Outdoors: For outdoor use only as an
aid in reducing annoyance from these insects. Spray
outside surfaces of screens, doors, window frames
or wherever these insects may enter the room. Also
treat surfaces around light fixtures on porches, in
garages, and other places where these insects alight
or congregate.