Bonide Beetle Bagger Japanese Beetle Trap Lures - Manual

KEEP OUT OF REACH OF CHILDREN
CAUTION
(See back panel for additional precautionary statements)
IT LASTS
ALL SEASON
TRAP ASSEMBLY:
1) Remove vanes, bag and lure from box
2) Slide vanes together at open slots (to form an “X”). Make sure the ends
slide into the channels of the vanes.
3) Attach the bag to the hooks on the vanes.
4) Peel foil covering off of the dual lure package, as marked on the package.
Do not remove contents (lures). Position the dual lure plastic package so
that the open (exposed) side faces inward toward the trap. Insert one edge
of the lure package into one vane slot, then tip upward to insert into the
opposite vane slot.
5) Your trap is now ready to hang and use.
PLACEMENT:
The hanger loop on the top of the vane is used to suspend the trap. Using a twist-tie, string
or wire, hang the trap from a tree, or a metal or wooden stake, about 3 to 5 feet above the
ground. To be most effective, the trap should be located about 10 feet downwind of the foliage
to intercept beetles heading toward it. Do not place the trap near or in the foliage as it will
attract more beetles into the foliage.