Bonide Termite & Carpenter Ant Control Conc. - Manual (Page 3)

For outdoor use only as an aid in reducing annoyance from these insects. Spray
outside surfaces of screens, doors, window frames or wherever these insects may enter
the room. Also treat surfaces around light fixtures on porches, in garages, and other
places where these insects alight or congregate. Repeat as necessary.
HOUSE FLIES, MOSQUITOES, CLUSTER
FLIES, GNATS, FLYING MOTHS OUTDOORS
For treatment of localized infestations of these insects in outdoor areas where there
are weeds or bushy non-crop areas, spray infested areas thoroughly. For ants,
thoroughly wet hills and runways. Repeat application as reinfestations warrant and as
reinfestations occur.
ANTS, DEER AND LONE STAR TICKS, CRICKETS,
FLEAS, CICADAS (LOCUST) AND EARWIGS, OUTDOORS
Application should be made in late evening when insects are at rest. Aim spray at
nest openings in ground, bushes, and in cracks and crevices which may harbor nests,
saturating nest openings and contacting as many insects as possible.
WASPS, HORNETS, YELLOW JACKETS,
BEES (including Carpenter Bees) OUTDOORS
Use this product to control ants, Asian lady beetle, clover mites, crickets, earwigs,
millipedes and sowbugs (pillbugs) on the outside surfaces of buildings. To help prevent
infestation of buildings, treat the building foundation to a height of 3 feet where pests are
and may find entrance. Also, apply as a spot treatment to outside surfaces of buildings,
including porches, screens, window frames, eaves, patios, garages, refuse dumps, and
other areas where these pests congregate or have been seen. Repeat treatment as
needed to maintain effectiveness.
For heavy infestations, use the 0.50% dilution. For lighter infestations and for
maintenance purposes, use the 0.25% dilution. One gallon of finished spray is sufficient
to treat 1580 linear feet with a 6 inch spray band.
PESTS ON OUTSIDE SURFACES OF BUILDINGS