Bonide Systemic Insect Spray RTS - Manual (Page 2)

DIRECTIONS FOR USE
ESTABLISHED ORNAMENTALS IN RESIDENTIAL AREAS
1. Make sure knob control lever is in "OFF" position, then connect sprayer to garden hose.
2. When spraying low growing groundcovers and small shrubs, twist the sprayer hood to
the "FAN" position. When spraying taller trees, shrubs and ornamentals, twist the
sprayer hood to the "STREAM" position for extended reach and more uniform coverage.
3. Turn water on at faucet. To begin spraying, turn knob control lever to "ON" position.
The product mixes automatically with the water as you spray.
4. To stop spraying, turn knob control lever to the "OFF" position. Turn off water at the faucet.
To relieve pressure, turn knob control lever to the "ON" position and point the sprayer away
from any desirable plants before disconnecting the spray nozzle from the garden hose.
READY-TO-SPRAY INSTRUCTIONS
RESTRICTIONS FOR ALL USES:
• Do not allow children and pets to re-enter the treated area until after the spray has dried.
• Do not spray the product into fish pools, ponds, streams, or lakes.
• Do not allow this product to contact plants in bloom if bees are foraging in the treatment area.
• Regardless of application method, do not apply more than 9.4 oz. Imidacloprid per
1,000 sq. ft. per year.
• Do not apply this product, by any application method to linden, basswood, or other
Tilia species.
Read and follow all label directions.
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
Shake well before using. For outdoor foliar applications, follow these directions to protect pollinators:
Do not apply this product while bees are foraging. Do not apply this product
to plants that are flowering. Only apply after all flower petals have fallen off.
This product is for use on outdoor trees, shrubs and groundcovers in landscape
plantings as listed in the table below:
RESTRICTIONS FOR ORNAMENTALS:
• Do not apply to soil that is frozen or waterlogged.