Bonide Snake Stopper RTS - Manual (Page 3)

1. Shake container thoroughly, then attach to garden hose.
2. Turn on water supply at the source. Water pressure will build in hose
since the sprayer is already in the “OFF” position.
3. To apply product, bend safety tab and turn the control valve clockwise
to the “ON” position.
4. For best results, hold sprayer and bottle level, and direct spray in a
sweeping side-to-side movement. Spray the contents of bottle evenly
over the lawn surface. Do not overlap areas already sprayed.
5. When spraying is complete, turn the control valve back
(counterclockwise). Turn the water off. Disconnect hose from applicator
and store product in original container.
INSTRUCTIONS FOR HOSE END ATTACHMENT CONTAINERS
ENDANGERED SPECIES CONSIDERATIONS
Before using this product, consult with State or local wildlife authorities
to ensure that use does not present a hazard to any threatened or
endangered species. Where necessary, obtaining all required permits and
licenses is the responsibility of the applicator.
User Precautions - Reminder
Some snakes are poisonous, NEVER attempt to pick up a snake unless
you are properly trained, experienced and know which species you are
dealing with. Handling wild snakes is best left to experts. Contact your local
wildlife management office for further information.