Bonide INFUSE RTS - Manual (Page 2)

It is a violation of Federal law to use this product in a manner inconsistent with
its labeling.
Shake well before using.
DIRECTIONS FOR USE
When to apply: This product is highly effective when it is used at the first sign
of disease. Unless otherwise specified, treat at the first sign of disease. Reapply
as directed in “COMMENTS” until lawn shows signs of recovery. Resume
applications if disease reoccurs.
When to mow: Apply after mowing or allow sprayed lawn to completely dry
before mowing.
How to apply: Measure lawn. Calculate square feet by multiplying length times
width. Spray evenly over measured area. Treat entire lawn.
ESTABLISHED LAWNS
CONNECT: 1) Shake well before using. 2) Connect sprayer to hose. 3) Turn
on water.
SPRAY: 1) To begin spraying, point nozzle in the direction you want to spray. 2)
Bend small plastic tab back and turn knob clockwise to “ON” position. 3) Spray
evenly over measured area. See chart on next page for “AREA TO COVER”.
FINISH: 1) To stop spraying, turn knob counter clockwise to “OFF” position.
2) Turn off water. 3) Relieve water pressure by turning knob to “ON” position
until water slows to a drip. Then, turn knob back to OFF position. 4) Disconnect
sprayer from hose.
HOW TO USE THE ATTACHED HOSE-END SPRAYER