Blomberg GSN 9423 A - Manual (Page 28)

27 EN
Programme selection
1. Press On / Off key to turn on your
machine.
2. Refer to "Table of Programme Data
and Average Consumption Values"
to select a washing programme
suitable for your dishes.
3. Press Programme Selection key
repeatedly until the number of the
selected programme appears on the
Programme indicator .
Programme number will increase by
one each time you press the key.
C
Number of the programmes on the
machine may change depending on
the model you have purchased.
Adding an auxiliary function to
the programme
Depending on your needs, you can
add Half Load (1/2), Tablet Detergent,
Express and Time Delay functions to the
programme you have selected.
Press the key of the function you wish to
add. Indicator of the relevant function will
appear on the display.
Setting Time Delay function
If an economical electricity tariff is
applied in your region, you can use the
Time Delay function to wash your dishes
during appropriate hours.
1. Press the Time Delay function
key after selecting the washing
programme and other auxiliary
functions. Time Delay indicator ( )
will start flashing on the display.
2. Press Time Delay key to set the time
you wish. Time will increase with
increments of 30 minutes up to 24
hours every time you press the key.
3. Press Start / Pause / Cancel key.
Delay time will start countdown. Time
Delay indicator ( ) and Start / Pause
indicator will light continuously.
Remaining time will appear on the
Time Delay indicator. Programme
will start automatically when the
countdown is over.
Changing the settings during Time
Delay
While the Time Delay function is
activated, you can make changes
in the washing programme, other
auxiliary functions or the delay time.
1. Press Start / Pause / Cancel key
to switch the machine into Pause
mode. Countdown will stop.
2. Select the new programme,
auxiliary functions and time as
described in the sections above.
3. Press Start / Pause / Cancel key.
Countdown will resume or restart.
Canceling the Time Delay function
1. Press and hold Start / Pause /
Cancel key for 3 seconds.
2. Release the key when the Start /
Pause indicator starts flashing. For
a couple of minutes the machine
will fulfill the necessary operations
required to cancel the function.
Once the Time Delay function is
cancelled, "00:00" will appear on
the Remaining Time indicator.
C
You can select and start a
new programme following the
cancellation of Time Delay
function.
C
Time Delay function can not be set
after the programme starts.