Blomberg GSN 9423 A - Manual (Page 16)

15 EN
1013_redaksiyon
1013_redaksiyon
Rinse aid
C
The rinse aid used in dishwashers
is a special combination used to
increase drying efficiency and
prevent water or limescale stains
on the washed items. For this
reason, care must be paid to have
rinse aid in the rinse aid reservoir
and to use rinse aids produced
specially for dishwashers only.
Check Rinse Aid Indicator to determine
whether it is necessary to add rinse
aid or not 3 (depends on the model).
Having a dark light on the indicator
shows that there is sufficient amount of
rinse aid in the dispenser. If the colour
of the indicator is light, add rinse aid.
1. Open the lid of the rinse aid
reservoir by pressing its latch (B).
4. Turn the rinse aid amount
adjuster manually to a position
between 1 and 6 (4). If there are
stains on tableware items after
washing, level must be increased
and if there is a blue trace after
wiping them by hand, it must be
decreased. This is set to position 4
as factory default.
Items not suitable for washing in the
dishwasher
•
Never wash dishes soiled by
cigarette ash, candle remnants,
polish, dyestuff, chemicals, etc. in
your dishwasher.
•
Do not wash iron alloy items in the
dishwasher. It can get corroded or
leave stains on other items.
•
Do not wash silverware and
cutlery with wooden or bone
stems, glued pieces, or pieces that
are not resistant to heat, as well as
copper and tin-plated containers in
the dishwasher.
C
Decorative prints of chinaware as
well as aluminum and silver items
may get discoloured or tarnished
after washing in the dishwasher
just as it happens in handwashing
as well. Some delicate glass types
and crystals may become dull in
�
�
�
�
�
�
2. Fill the reservoir until “MAX” level.
3. Close the lid of the reservoir by
pressing on it lightly.
C
Wipe clean any spilled rinse aid
outside the reservoir. Rinse aid
that spilled accidentally will cause
foaming and it will eventually
decrease washing performance.