Blaupunkt CASABLANCA MP56 - Manual (Page 55)

Changing basic settings in the settings menu
120
Setting the time ( TIME)
Press the softkey 7 (next to
"TIME").
The current time is shown on
the main line
A
. The hours
fl ash.
On the rocker switch
3 , press
or to change the hours.
On the rocker switch 3 , press
to change to the minutes.
The minutes fl ash.
On the rocker switch
3 , press
or to change the minutes.
Press the OK button A to fi n-
ish the input and to save the
time.
Note:
To quit the input without
changing the time, press the
ESC
button @ .
Switching the time display on/
off with switched-off device
( OFFCLOCK)
The time can be displayed while
the device is switched off, if the
vehicle ignition is switched on. To
switch this time display on/off:
Press the softkey 8 (next to
"OFFCLOCK").
"SHOW CLOCK": The time
display is switched on.
"HIDE CLOCK": The time dis-
play is switched off.
➔
➔
➔
➔
➔
➔
•
•
Switching the RDS synchronisa-
tion of the clock on/off ( AUTO-
SYNC)
The clock can automatically be
synchronised with the RDS time
signal, provided that a station is
set that broadcasts this RDS time
signal.
Press the softkey < (next to
"AUTOSYNC").
"AUTOSYNC ON": The syn-
chronisation is switched on.
"AUTOSYNC OFF": The syn-
chronisation is switched off.
Switching the 24-hour time dis-
play on/off ( 24H MODE)
The time can be displayed using
the 12-hour or 24-hour format.
To switch between these two for-
mats:
Press the softkey ; (next to
"24H MODE").
"24H MODE ON": The 24-
hour format is switched on.
"24H MODE OFF": The 12-
hour format (AM/PM) is
switched on.
➔
•
•
➔
•
•
03_BA_Casablanca_1_ENG.indd Menü120 03_BA_Casablanca_1_ENG.indd Menü120 31.05.2006 11:15:57 Uhr 31.05.2006 11:15:57 Uhr