Blaupunkt CASABLANCA MP56 User Manual

Page 44

Changing basic settings in the settings menu

109

GLISH

DEUT

SCH

FRAN

AIS

ALIAN

NEDERLANDS

Creating/changing a user-deﬁ ned equalizer setting ( ADJUST)
You can adjust the three different user-deﬁ ned equalizer settings to

different situations, e.g. for the driver alone, for driver and passenger

or for passengers in the front and the rear.

Select the user-deﬁ ned equalizer setting which you want to create/

change as described in the preceding section.
Press the softkey

(next to "ADJUST"). The "USER EQ ADJUST"

menu opens.

ADJUST

USER EQ-1 ADJUST

MANUAL

DEQ

MAXEX

AUTO

PLACE MICRO 5

BREAK

80 Hz +11db Q1

LOW1
LOW2
HIGH1

HIGH2
HIGH3
HIGH4

➔

AUTO :
You can automatically create one

of the three equalizer settings us-

ing a measurement microphone

(available as an accessory).
Before starting, ensure the fol-

lowing:

The measurement microphone

must be connected before in-

stalling the device as described

in the installation instructions

of the measurement micro-

phone.
There must be true silence dur-

ing the measurement since ex-

ternal noise falsify the meas-

urement. For this reason, close

all windows, doors, and the

sliding sunroof.

•

Switch off the engine, but

leave the ignition switched on.
The temperature inside the ve-

hicle must be below 55 °C.
All the loudspeakers must be

connected. The sound radi-

ating from the loudspeakers

must not be obstructed by any

objects.
Position the measurement mi-

crophone

for the driver only – 10 cm

next to the right ear of the

driver,
for driver and passenger –

exactly between both at the

head level,

•

➔

•

03_BA_Casablanca_1_ENG.indd Menü109

31.05.2006 11:15:52 Uhr