Blizzard Lighting X3 SwitchBlade (Rev A) - Manual (Page 11)

Page 11
SwitchBlade™ X3 Manual Rev. A © 2014 Blizzard Lighting, LLC
Control Panel Menu Structure
Addr d001 - d512
To choose the DMX address
cLnd
Select Pan/Tilt Direction
H Y
Normal Pan / Normal Tilt Direction
H - Y
Normal Pan / Reverse Tilt Direction
-H Y
Reverse Pan / Normal Tilt Direction
-H -Y
Reverse Pan / Reverse Tilt Direction
SLnd HoST
Run the Fixture in Master
SLAV
Run the Fixture in Slave
dISP oFF - on
Turn Display Menu Off and On
SoUn oFF - on
Turn Sound Active Mode Off and On
CHnL 9CH
Set the Fixture to 9 Channel Mode
21CH
Set the Fixture to 21 Channel Mode
NAn oFF - on
Control of all Features via Control Panel
ch.1 c000-c255
Pan Control
ch.2 c000-c255
Pan Fine Control
ch.3 c000-c255
Tilt Control
ch.4 c000-c255
Tilt Fine Control
ch.5 c000-c255
Speed Control of Built in Programs
ch.6 c000-c255
Dimmer (0% <-> 100%)
ch.7 c000-c255
Strobe (slow <-> fast)
ch.8 c000-c255
Random Strobe (slow <-> fast)
ch.9 c000-c255
Auto Mode
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Set the DMX Starting Address:
1.) The default mode for the fixture is DMX, which appears as d001 on the LED readout. To
select a different DMX address, using the
Use the buttons to select the correct address, then hit to confirm.
Set the DMX Channel Mode:
1.) To select a DMX channel mode, press the
buttons until the display reads CHnL and press the button. Then use the
DOWN> buttons to select 9CH and press for 9-channel mode, or select 21CH and
press for 21-channel mode.
Master/Slave Mode:
1.) To set the fixture as the master fixture (default), press the
SLnd, then use the buttons until the display reads HoST. Press the
button to confirm. The master (host) is the first fixture in the DMX chain.
2.) To run the fixture as a slave, press the
buttons until the display reads SLAV. Press the button to confirm.
This unit will now follow the master fixture.