Page 13 – Blizzard Lighting Stealth ProPar (Rev A) User Manual
Page 13
Page 13
ProPar Stealth Manual Rev. A
Copyright (c) 2012 Blizzard Lighting, LLC
DMX Values In-Depth
Channel
Value
What It Does
1
000 <--> 255
Dimmer (0% <--> 100%)
2
000 <--> 255
Red Intensity (0% <--> 100%)
3
000 <--> 255
Green Intensity (0% <--> 100%)
4
000 <--> 255
Blue Intensity (0% <--> 100%)
5
000 <--> 014
015 <--> 255
Strobe
Dimming
Strobe (Slow <--> Fast)
6
000 <--> 031
032 <--> 063
064 <--> 095
096 <--> 127
128 <--> 164
165 <--> 191
192 <--> 223
224 <--> 255
Fade, Color Change, Sound Active
No Function
Fade In (Ch. 5 Controls Speed)
Fade Out (Ch. 5 Controls Speed)
Fade In / Fade Out (Ch. 5 Controls Speed)
Multicolor Fade (Ch. 5 Controls Speed)
3 Color Jump (Ch. 5 Controls Speed)
7 Color Jump (Ch. 5 Controls Speed)
Sound Active, Multicolor (Ch. 5 Controls Speed)
Troubleshooting
Symptom
Solution
No Light Output
Check to ensure fi xture is operating under correct mode, IE sound
active/auto/DMX/Etc., if applicable.
Chase Speed Too
Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power
Check AC cord and circuit for malfunction.
No Response to
Audio
Verify that the fi xture is in “Sound Active” mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not
Responding /
Responding Er-
raticly
Make sure all connectors are seated properly and securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Reset fi xture(s).
If your problem persists or isn’t listed contact [email protected].
Manual Color Adjustment:
Allows the user to adjust the color balance of the fi xture. These settings are
global, they will effect all modes.
1.) Use the