Blizzard Lighting Stealth ProPar (Rev A) - Manual (Page 12)

Page 12
ProPar Stealth Manual Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fi xture is DMX, which appears as
A001
on the LED Readout. To select a different DMX address, using the
Addr
, then hit . Use the
DOWN> buttons to select the correct address, then hit to
confi rm.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user
selectable speeds.
1.) To set the fi xture in Flash/Fade mode, select
FLAS
or
FAdE
To confi rm, press the button.
2.) Now, select the fl ash or fade speed using
, then hit . The display reads
SP15
(slowest) to
SP00
(fastest), then press the button to confi rm.
3.) To use the fi xture in automatic mode, select
ASC-
, then press the
button to confi rm.
4.) Adjust the speed of the chase as above using
SP15
(slowest) to
SP00
(fastest) then press the button to confi rm.
5.) To use the fi xture as a slave unit, you simply need to make sure
the fi xture is set to the default setting of
A001
and conected to
another fi xture that will be the master fi xture.
Sound Acitve Mode 1: (7 color jump w/strobe effect):
1.) To use this sound active mode, select
SouF
, then press the
button to confi rm.
Sound Acitve Mode 2: (7-color jump):
1.) To use this sound active mode, select
SouA
, then press the
button to confi rm.
Standalone (Program) Mode:
Allows a single unit to display a variety of colors and programs without a DMX
controller.
1.) To set the fi xture in manual mode, select Pr-- .
To confi rm, press the button.
2.) Now, select the program by using the and
buttons to select
Pr00-Pr15
. To confi rm, press the
button.