Page 15, Dmx values in-depth (6-channel mode), Dmx values in-depth (3-channel, hsv mode) – Blizzard Lighting Seven-6 ProPar User Manual
Page 15: Troubleshooting
Page 15
ProPAR 7.6 Manual Rev. A
© 2014 Blizzard Lighting, LLC
DMX Values In-Depth (6-Channel Mode)
Channel Value
What It Does
1
000 <--> 255 Red Intensity (0% <--> 100%)
2
000 <--> 255 Green Intensity (0% <--> 100%)
3
000 <--> 255 Blue Intensity (0% <--> 100%)
4
000 <--> 255 Amber Intensity (0% <--> 100%)
5
000 <--> 255 White Intensity (0% <--> 100%)
6
000 <--> 255 UV Intensity (0% <--> 100%)
DMX Values In-Depth (3-Channel, HSV Mode)
Channel Value
What It Does
1
000 <--> 255 Hue (0% <--> 100%)
2
000 <--> 255 Saturation (0% <--> 100%)
3
000 <--> 255 Value (0% <--> 100%)
Troubleshooting
Symptom
Solution
Fixture Auto-Shut
Off
Check the fan in the fixture. If it is stopped or moving slower than
normal, the unit may have shut itself off due to high heat. This is to
protect the fixture from overheating. Clear the fan of obstructions,
or return the unit for service.
Beam is Dim
Check optical system and clean excess dust/grime. Also ensure that
the 220V/110V switch is in the correct position, if applicable.
No Light Output
Check to ensure fixture is operating under correct mode, IE sound
active/auto/DMX/Etc., if applicable.
Chase Speed Too
Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power
Check fuse, AC cord and circuit for malfunction.
Blown Fuse
Check AC cord and circuit for damage, verify that moving parts are
not restricted and that unit’s ventilation is not obstructed
Slow Movement
Verify that 220V/110V switch is in the correct position, if applicable.
Also check that speed channels are set appropriately.
No Response to
Audio
Verify that the fixture is in “Sound Active” mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not
Responding /
Responding Er-
ratically
Make sure all connectors are seated properly and securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Reset fixture(s).
Fixture Moving
On Its Own
Verify proper mode of operation. Is the fixture in “Auto” mode?
If your problem isn’t listed, or if problems persist,
please open a support ticket at www.blizzardlighting.com/tickets.