Blizzard Lighting Polaris LED Spot(Rev A) - Manual (Page 8)

Page 15
Polaris Manual Rev. A Copyright (c) 2010 Blizzard Lighting, LLC
DMX Channel Values (9 Channel Mode)
Channel Channel Value Does...
1 000 <-> 255 Pan
2 000 <-> 255 Tilt
3
000 <-> 014
015 <-> 029
030 <-> 044
045 <-> 059
060 <-> 074
075 <-> 089
090 <-> 104
105 <-> 119
120 <-> 134
135 <-> 149
150 <-> 255
Color
Open
Red
Yellow
Green
Pink
Blue
Orange
Magenta
Light Blue
Light Green
Color Scroll (Slow <-> Fast)
4
000 <-> 009
010 <-> 019
020 <-> 029
030 <-> 039
040 <-> 049
050 <-> 059
060 <-> 069
070 <-> 079
080 <-> 099
100 <-> 119
120 <-> 139
140 <-> 159
160 <-> 179
180 <-> 199
200 <-> 219
220 <-> 255
Gobo
Open
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo Shake 1
Gobo Shake 2
Gobo Shake 3
Gobo Shake 4
Gobo Shake 5
Gobo Shake 6
Gobo Shake 7
Gobo Wheel Spin (Slow <-> Fast)
5
000 <-> 002
003 <-> 006
007 <-> 128
129 <-> 132
133 <-> 136
137 <-> 255
Gobo Rotation
No function
Clockwise (slowest)
Clockwise (Slow <-> Fast)
No function
Counter-clockwise (Slowest)
Counter-clockwise (Slow <-> Fast)
6 000 <-> 127
128 <-> 255
Prism
No function
Prism
7 000 <-> 255
Dimmer
0 <-> 100%
8
000 <-> 031
032 <-> 063
064 <-> 095
096 <-> 127
128 <-> 159
160 <-> 191
192 <-> 223
224 <-> 255
Strobe
Closed
Open
Strobe (Slow <-> Fast)
Open
Pulse Strobe (Slow <-> Fast)
Open
Random Strobe (Slow <-> Fast)
Open
9
000 <-> 019
020 <-> 039
040 <-> 059
060 <-> 079
080 <-> 099
100 <-> 119
120 <-> 139
140 <-> 159
160 <-> 179
180 <-> 199
200 <-> 219
220 <-> 255
Control (Hold Each for 5 Seconds to Set)
No function
Pan/tilt move-in-black activate
Pan/tilt move-in-black deactivate
Auto 1
Auto 2
Sound Active 1
Sound Active 2
Custom Program
Test
No function
Reset
No function
Page 16
Polaris Manual Rev. A Copyright (c) 2010 Blizzard Lighting, LLC
Troubleshooting
Symptom Solution
Fixture Auto-
Shut Off
Check the fan in the fi xture. If it is stopped or moving
slower than normal, the unit may have shut itself off due to
high heat. This is to protect the fi xture from overheating.
Clear the fan of obstructions, or return the unit for service.
Beam is Dim Check optical system and clean excess dust/grime. Also
ensure that the 220V/110V switch is in the correct position,
if applicable.
No Light Output Check to ensure fi xture is operating under correct mode, IE
sound active/auto/DMX/Etc., if applicable. Contact service
for more information.
Chase Speed
Too Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power Check fuse, AC cord and circuit for malfunction.
Blown Fuse Check AC cord and circuit for damage, verify that moving
parts are not restricted and that unit’s ventilation is not
obstructed
Slow Movement Verify that 220V/110V switch is in the correct position, if
applicable. Also check that speed channels are set appropri-
ately.
No Response to
Audio
Verify that the fi xture is in “Sound Active” mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not
Responding /
Responding Er-
raticly
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Reset fi xture(s).
Intermittant
Lamp
Check lamp for properly installation.
Relamp, lamp may have reached end of life.
Remote Doesn’t
Work
Verify remote control cable is installed properly and securely.
Verify remote is correct type (CA-9 or other as applicable.)
Fixture Moving
On Its Own
Verify proper mode of operation. Is the fi xture in “Auto”
mode?
If your problem isn’t listed, or if problems persist,
please contact support: [email protected].