Operating adjustments, Page 10, Dip switch settings – Blizzard Lighting Memerizor RGB 3D Laser(Rev A) User Manual

Page 10

Page 10

Mezmerizor™ Manual - Rev. A

4. OPERATING ADJUSTMENTS

DIP Switch Settings

All of the various functions of the

Mezmerizor™ are set up using the

10-position DIP switch located on

the rear of the unit. Using this set

of switches, you can select the

different operating modes and also

set up the starting DMX channel

in DMX mode. The chart below

describes the various operating modes and their respective DIP switch settings:

Auto Mode

1.) Set the dipswitch numbers #9 and #10 to ON. Then switch ON either #1 (Auto Anima-

tion) , #2 (Auto 3D Shapes), #3 (Auto Galaxy 3D), #4 (Auto Star Field), or #1 thru #8

OFF (Auto 4-in-1 FX).

Sound Active Mode

1.) Adjust the sensitivity knob to the desired level.

2.) Set the dipswitch numbers #10 to ON. Then switch ON either #1 (Sound Active Anima-

tion) , #2 (Sound Active 3D Shapes), #3 (Sound Active Galaxy 3D), #4 (Sound Active Star

Field), or #1 thru #9 OFF (Sound Active 4-in-1 FX).

Slave Mode

1.) Set dipswitch #1 to ON and others to OFF.

DMX Mode

1.) Set dipswitch 10 to OFF.

2.) Connect DMX OUT of controller to DMX IN of 1st fixture. Daisy chain DMX OUT to DMX

IN for any additional fixtures.

3.) Use dipswitches 1 – 9 to set the fixtures Starting DMX Address. Each dipswitch repre-

sents a binary value in which the sum would equal the set address.

Example: To set the fixtures starting DMX address to 12, dipswitch #10 would be OFF

(DMX Mode), plus dipswitch #3 and #4 would be ON. (4+8=12).

Dipswitch

#10

Value

128

256

DIPSWITCH CHART

Function

#10

OFF

Auto Blizzard Logo

OFF

Auto 3D Shapes

OFF

Auto Galaxy 3D

OFF

Auto Star Field

OFF

Auto 4-in-1 FX

OFF

Sound Active Blizzard Logo

OFF

Sound Active Shapes

OFF

Sound Active Galaxy

OFF

Sound Active Star Field

OFF

Sound Active 4-in-1 FX

SET DMX ADDRESS

OFF

DMX Mode

DIP