B&B Electronics ETCIACT - Manual (Page 8)

6 Documentation Number ETCIACT0698 Manual
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 433-5105
j ) Windows then copies the files and may ask you to insert a Windows
disk . Insert the disk and click “OK”.
k) Reboot your PC.
To check the installation go to Control Panel (Start/Settings/Control
Panel). Click on the Device Manager tab, click on Adapter, and double
click on the adapter that you installed.
3.1 Additional Configuration Information
You may need to configure the adapter card using the configuration
utility that came with your PCMCIA drive. If so, use these parameters.
Product Name Ethernet
Configuration Index 0x20, (0x21, 0x22, 0x23)
I/O Port Address 0x300 (0x320, 0x340, 0x360)
I/O Length/ Size 32 bytes
I/O Bus Width 16 bit
IRQ 3, 4, 5, 9, 10, 12, 15
Memory Windows Disabled