Belkin F5D4050 - Manual (Page 8)

6
INSTALLING THE POWERLINE USB ADAPTER
Installing and Setting Up the Powerline USB Adapter - F5D4050
1. Install the software FIRST. Your
Belkin Powerline USB Adapter
will not work until you install
the software.
2. Connect the Adapter directly into
the wall outlet.
3. Do not connect the Adapter into
a power strip or surge protector
since these devices may contain
circuit filters, which may degrade
the powerline signal.
4. Connect the powerline USB cable
to your PC.
5. Let Windows finish installing the Adapter.
Software and Driver Installation
1. Insert the CD into your CD-ROM drive.
2. The Belkin Powerline USB Adapter Setup Utility screen will automatically
appear. If it does not appear within 15–20 seconds, select your CD-ROM
drive and double-click on the icon named “Setup.exe”.
NOTE: INSTALL THE SOFTWARE BEFORE YOU CONNECT THE ADAPTER
TO YOUR COMPUTER