Belkin F5D4050 - Manual (Page 6)

4
INSTALLING THE POWERLINE ETHERNET ADAPTER
Installing and Setting Up the Powerline Ethernet Adapter - F5D4070
Skip to page 6 for Setting Up the Powerline USB Adapter
1. Install the software FIRST.
2. Connect the Adapter directly into the
wall outlet.
3. Do not connect the Adapter into a power
strip or surge protectors since these devices
may contain circuit filters, which may
degrade the powerline signal.
4. Connect the powerline ETHERNET cable to
your PC.
5. Let Windows finish installing the Adapter.
Software and Driver Installation
1. Insert the CD into your CD-ROM drive.
2. The Belkin Powerline ETHERNET Adapter Setup Utility screen will
automatically appear. If it does not appear within 15–20 seconds, select
your CD-ROM drive and double-click on the icon named “Setup.exe”.
3. The installer will start. Click “Next” to continue.