Bendix Commercial Vehicle Systems AutoVue LDW by Bendix CVS Service Data Sheet - Manual (Page 6)

6
FIGURE 8 - CORRECT LOCATIONS FOR CAMERA MOUNTING BRACKETS
Top of Windshield
A
Notch
in the
Camera
Bracket
B
During troubleshooting, if you need to check
that the camera bracket is installed at the
correct point on the windshield, use the
Make/Model columns of the table (left) to
find the Camera Location Code. The second
table (below) shows the correct vertical and
horizontal offset for each Code. Measure
from the notch in the camera bracket to
verify that the location is correct.
Camera
Location
Code
Horizontal
Offset
“A”
Vertical
Offset
“B”
1 9 ± 0.25 in. 2 ± 0.5 in.
2 6 ± 0.25 in. 2 ± 0.5 in.
3 9 ± 0.25 in. 3 ± 0.5 in.
7 7 ± 0.25 in. 3 ± 0.5 in.
8 7 ± 0.25 in. 2 ± 0.5 in.
9 6 ± 0.25 in.
2.5 ± 0.5
in.
10 8 ± 0.25 in. 2 ± 0.5 in.
“Torpedo” Level
Rests on the
Bracket Tabs
Center Line
* All trademarks shown here are the property of their
respective owners and are used for reference only.
Vehicle
OEM*
Model
Camera
Location
Code
Freightliner ®
Argosy 1
Cascadia (AM) 8
Cascadia (OEM) 10
Cent/Col. 1
114SD
2
Classic XL
FL70
M2
International ®
4300
2
8100
8600
9200
9400
9900
Lonestar
9
Pro Star
2
Workstar/7000 Series
Kenworth ®
T2000 2
T600/800 3
T600/800 Flt Wndshld 7
T660 3
T680 9
T700 2
Mack ®
Pinnacle
2
Vision
Peterbilt ®
378
2
379
385
386
389
340 Car Hauler
379 Car Hauler
384/386 with video
384/386 with Curved Windshield
387 (AM)
387 (OEM)
579
9
Sterling ®
A-Line
2
A-Line Car Hauler
Volvo ®
NonVolvo Engine
2
Volvo Engine
Western Star ® 4900 2
2.6 WINDSHIELD MOUNTING INFORMATION
Left: Use only Bendix windshield
adhesive when re-mounting
a camera bracket.