Bendix Commercial Vehicle Systems BLINDSPOTTER TROUBLESHOOTING GUIDE - Manual (Page 2)

General Information
General Warnings
Before starting a vehicle:
1. Sit in the driver’s seat.
2. Place the vehicle in neutral.
3. Set the parking brake.
4. Disengage the clutch.
Before working on the vehicle or leaving the cab with the engine
running:
1. Place the vehicle in neutral.
2. Set the parking brake.
3. Block the wheels.
Do not operate the vehicle if the alternator lamp is lit or if the
gauges indicate low voltage.
Related Publications
Related documents are available for download on the Document
Library or from the Literature Center on www.bendix.com.
Suggested Tools
Part No. Description
5505027 Volt/Ohm Meter
(Standard commercially available VOM)
For Bendix Service Parts call 1-800-AIR-BRAKE (1-800-247-2725).