Bang & Olufsen BeoCom 2 - Getting Started - Manual (Page 7)

Troubleshooting via the display – the Alert
menu
If conditions exist which impede or otherwise
affect the optimal use of your phone, Alert
appears in the display while the handset is in
standby and remains as long as the conditions
apply.
‘Alert’ appears in the display …
> Press OK to be able to view the cause of the
alert.
> Push the Track point down to see if other
conditions apply.
> Press OK to be able to adjust relevant settings,
if available.
> Push the Track point up or down to adjust
settings, and press OK to store them.
If you do not wish to view the alert, simply push
the Track point down.
Register
handset
to base?
Living Room
silenced
No contact
with base
Line is busy
7
Other messages in
standby:
The handset is not
registered to a base.
Press OK to start the
first-time setup
procedure.
The handset is silenced.
Press OK to be able to
deactivate the silence
function.
There is no connection
between the base and
the handset.
The line is busy. Press ,
then OK to ‘break in’
on the call. This is only
possible if you use the
handset with a BeoLine
base.