Registration of the handset to a base, Registration of the handset to a base 10 – Bang & Olufsen BeoCom 2 - Getting Started User Manual
Page 10
For the base and the handset to be able to
communicate, the handset must be
registered to a base. Up to eight* handsets
can be registered to the same base. You can
not register a handset to more than one
base.
> Disconnect the base from the mains for at least
two seconds and then reconnect it. The
indicator light flashes, and the base is open for
registration for five minutes.
When your base is open for registration, follow
the procedure on the following page.
*If you use a BeoCom 6000 base, a BeoLine PSTN
base or a BeoLine ISDN base, you can only
register six handsets.
Registration of the handset to a
base
10
The BeoLine base.
Indicator light