Bang & Olufsen BeoLine 2 - User Guide User Manual

Page 7

Press to switch on the handset. The Language
menu appears. Turn the wheel to select the
desired menu language and press OK

Register handset to base? is shown in the display

Press OK. The handset searches for an open base

When a base is located, the PARK number* for
the base is shown. Check the number against
the number on the base

If the numbers do not match, turn the wheel to
move through the available bases, if more than
one is available. If your base is not shown, open

the base for registration once more and repeat
the procedure

If the numbers match, press to register the
handset to the base

If the base prompts you for a pincode, enter the
pincode and press OK. The display tells you
when registration is complete.

*The PARK number can be found on a label on

the base.

First-time registration to the

base …
Disconnect the base from the
mains for at least two seconds and
then reconnect it. The indicator
light flashes, and the base is open
for registration for five minutes.

to base?

Base found

36.000077123456

Base found

36.000077234567

0 – 9

This product is in conformity with the provisions of the Directives

1999/5/EC and 2006/95/EC.