Bang & Olufsen BeoSound 3 - User Guide - Manual (Page 15)

Delete a program
> Press RADIO to switch on the radio.
> Press or to find the program you wish to delete.
> Press
DELETE twice to delete the program. The display blinks and the
radio switches to the next program number.
Set the built-in clock
> While the system is in standby, press and hold ST.BY until the time
blinks in the display. If no time is set, the display shows ‘- -.- -’ instead
of digits.
> Press or to find the correct time. Holding down a button
accelerates the search.
> Press STORE to store the correct time.
> To see the time permanently in standby, press ST.BY while the system
is in standby. Press ST.BY again to cancel time viewing in standby.
Note that time viewing in standby is only possible while the system is
being charged.
Store a volume level
> While the volume level you prefer is shown in the display, press STORE
twice to store this level.
Note that you cannot store a volume level under 10% or over 70% of
maximum volume.
15