Bang & Olufsen BeoSound 3 - User Guide - Manual (Page 11)

Make a Stop Timer
You can set – in increments of 15 minutes – how long the radio is to play
before switching to standby. You can still switch to memory card
playback or switch the system to standby before the Stop Timer is carried
out. If you do so, the Stop Timer is cancelled.
> Press RADIO to switch on the radio.
> Press STOP to set a Stop Timer. The number of minutes before the
radio switches to standby is shown in the display. You can choose
between 00, 15, 30, 45, 60, 90 and 120 minutes. Choosing 00 is the
same as cancelling the Stop Timer.
> Press STOP repeatedly to change the number of minutes.
> When the desired number of minutes appears in the display, wait 5
seconds. The Stop Timer is then stored automatically.
11