Bang & Olufsen BeoSound 3 - User Guide - Manual (Page 14)

Tuning and preference settings
Tune in radio stations
> Press
RADIO to switch on the radio.
> Press or to start the tuning function. If you are tuning radio
stations for the first time, you can also press or to start tuning.
> When a station is found, the frequency is shown in the display.
> Press
STORE to store a program. The first available program number
blinks in the display.
> Press or to change the program number, if you like.
> Press
STORE to store the station on the displayed program number.
> Press or to resume tuning and repeat the procedure when the
station you want is found.
If you do not wish to store a station located during tuning, you resume
tuning by pressing or .
Manual tuning
When tuning does not produce a specific radio station, you can perform
manual tuning to store the station.
> Press RADIO to switch on the radio.
> Press or to start the tuning function.
> Press
STOP during search tuning to be able to perform manual tuning.
> Press or to tune manually up or down the frequency band.
> Press
STORE when the requested station is found. The first available
program number is displayed.
> Press or to change the program number, if you like.
> Press
STORE to store the radio station.
14