Bang & Olufsen BeoCenter 2 Socket Unit - User Guide - Manual (Page 10)

Audio/Video system
You can use your music system as a
stand-alone system or as an Audio/
Video system, if you connect the
systems with a Master Link cable.
If you connect your music system and
your video system, you must make
sure that they are set up to function
together. This means that you have
set it to the correct Option with Beo4
as described on this page.
When your music system is connected to
your video system with a Master Link
cable, you choose whether to use the
speakers connected to the music system, if
any, or the speakers connected to the
video system. Via the menu ‘DVD SOUND’
described on page 21 in the BeoCenter 2
Guide, you decide which speakers should
be used. Note: This function is only avail-
able if your BeoCenter 2 is equipped with
DVD.
To program Option for your audio system
with the Beo4 remote control …
> While holding down the • button, press LIST.
> Let go of both buttons.
> Press
LIST repeatedly until OPTION? is shown in
the Beo4 display and press GO.
> Press LIST repeatedly until A.OPT is shown in
the Beo4 display and then key in the
appropriate number (
0, 1, 2, 5 or 6).
Choose V.OPT to program Option for your video
system.
The music system has five different Option
settings:
Option 0: Used when your music system is
connected to your video system and no
speakers are connected directly to your music
system. If you wish to change the Option
setting to 0 from any other setting, change it
first to 1 before changing it to 0.
Option 1: Used when your music system is set up
on its own or connected to a video system, when
speakers are connected to your music system.
Option 2: Used when your music system is set up
in one room and connected to a video system
set up in another room.
Option 5: Used when your music system is set up
in a link room which also comprises a Bang &
Olufsen television.
Option 6: Used when your music system is set up
in a link room without a Bang & Olufsen tele-
vision.
An Audio/Video system. When your music system
is connected to a video system and the speakers
are connected to the video system, the video
system takes over some of the functions
mentioned in the BeoCenter 2 Guide, for example
programming a Timer.
A stand-alone setup.
Option 2 Option 0
Option 1
10