BT Studio 3500 - Manual (Page 45)

45
BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
Change base PIN code
Some functions are protected by a 4 digit PIN code which
must be entered if you want to change the settings.
The default PIN is 0000.
1. Press , scroll to
SETUP
and press .
2. Scroll to
P IN CODE
and press .
3. Enter the current 4 digit PIN code (default: 0000) and
press .
4. Enter your new 4-digit PIN and press .
5. Re-enter the new PIN again and press to confirm.
Dial mode
Your BT Studio 3500 is set to Tone dialling. In the UK, you
should only need to change this if connected to an older type
of switchboard/PBX which requires Pulse dialling.
1. Press , scroll to SETUP and press .
2. Scroll to DIAL MODE and press .
3. Press or to select
TONE DIAL
or PULSE DIAL and
press .
Base settings
IMPORTANT
If you change the base PIN, make sure
you keep a record of the new number
on page 55.
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 45