BT Studio 3500 - Manual (Page 34)

2. Scroll to OGM SETTING and press .
3. Scroll to
DELETE OGM
and press .
4. Press or to select either ANS AND REC or ANS ONLY and
press . Your personal OGM has been deleted and the pre-
recorded OGM will be played.
Answer delay
Answer delay sets the number of times your BT Studio 3500
will ring before the answer machine picks up your call and
starts playing the outgoing message.
You can change this setting to between 2-9 rings or Time
Saver. The default setting is 6 rings. When the answer on/off
setting is set to off, the answer delay is 20 rings.
Using the base:
1. Press and hold the button and release after the number
of rings required.
Using the handset:
1. Press , scroll to TAM SETTINGS and press .
2. Scroll to
ANS DELAY
and press . The handset will
display the current setting.
3. Use and to select the number of rings required and
press to confirm.
34 Using the answering machine
BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
Time saver
When you call from another phone to
access your messages remotely, if
your answering machine is set to time
saver and you have new messages it
will answer after 2 rings, if you do not
have any new messages, it will answer
after 6 rings. This means you can
hang up after 3 rings knowing you
have no new messages, saving you
time and the cost of the call. Your
handset will automatically return to
standby if no button is pressed for 15
seconds or more.
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 34