Bang & Olufsen BeoLab 5 - User Guide - Manual (Page 17)

Indicator lights and sound signals
In daily use, you will see that the
indicator light shines either red for a
while (standby) or green (playing).
In different situations, you may see
other indications, such as a flashing red
or green light, and combinations of
these colours. When setting up the PIN
code system, you will also hear sound
signals from the loudspeaker.
These instances are explained in the
relevant chapters throughout this
Guide, but to give you an overview,
all instances are explained on this page.
In the overview, you will find page
references to relevant chapters
Indicator light: Loudspeaker status:
Shines RED for a while and switches off…
Shines GREEN...
Flashes RED/OFF (1 sec ./1 sec.)
for approx. 12 seconds
Flashes RED (very quickly)…
Flashes intermittently GREEN/OFF
(1 sec./1 sec.)…
Flashes intermittently RED/OFF
(0.5 sec./0.5 sec.)…
Flashes intermittently GREEN/OFF
(2 sec/0.5 sec.)…
Flashes intermittently RED/GREEN
(0.5 sec./1 sec.)…
Flashes intermittently RED/GREEN
(1 sec./0.5 sec.)…
Flashes intermittently RED/GREEN
(1 sec./1 sec.)…
Switches briefly OFF, and then shines red
again…
The loudspeaker is in standby (p. 4).
The loudspeaker is on (p. 4).
Internal loudspeaker error (p. 4).
You are pressing the touch field.
Adaptive Bass Control calibration in progress
(pp. 12–13).
An error occurred during Adaptive Bass Control
calibration (pp. 12–13).
Adaptive Bass Control calibration has not yet been
performed (pp. 12–13).
Activation of the PIN code system in progress
(p. 14).
Indicates either:
– Deactivation of the PIN code system in progress
(p. 15);
– Changing of the PIN code in progress (p. 15);
– Input of a master code in progress (page 15).
The loudspeaker has been locked by the PIN code
system (p. 16).
Option setting has been accepted (p. 11).
Sound signal: Loudspeaker status:
Emits a brief sound (‘ding’)…
Emits a double-sound (‘dong-ding’)…
Emits a series of sounds (‘ding-dong,
dingdong, ding-dong’)…
Indicates one of these two instances related to the
PIN code system (pp. 14–15):
– The loudspeaker has been selected;
– Digit entry.
PIN or master code has been accepted
(pp. 14–15).
PIN code has not been accepted (pp. 14–15).
17