Bang & Olufsen BeoLab 3 - User Guide - Manual (Page 7)

Power Link
Mk 3
LEFT RIGHT
1
LEFT RIGHT
2
7
Power Link connections: These
connections carry both the right
and left sound signals. There fore,
the cables may be run in two ways:
1 Run a Power Link cable from the
Bang & Olufsen system directly
to each loudspeaker.
Or
2 Use a Power Link adapter (optional
accessory, available from your
Bang & Olufsen retailer). Run a
cable from the Bang & Olufsen
system to the first loudspeaker,
and then run another cable from
the first loudspeaker to the next
(this will often minimize cable
clutter).
Power Link cables: The cables
must be of the type which are
marked with a triangle on the plug.
Do not use any of the old type of
Power Link cables, as this will
cause noise, and thus not give
optimum sound quality!
Cable Clamp: For safety reasons,
the mains lead must be secured to
the loudspeaker. Use the enclosed
small cable clamp and screw.