Bang & Olufsen BeoLab 2 - User Guide - Manual (Page 9)

9
Setting the POSITION switch
Use the POSITION switch to ensure that the
bass response suits the placement of
BeoLab 2, and thus the surroundings.
Which switch setting to choose depends on
the distance from BeoLab 2 to the walls
and corners of the room.
The POSITION switch has three settings:
CORNER: Use this setting if BeoLab 2 is placed
in a corner – shown by the dark grey areas
in the illustration.
WALL: Use this setting if BeoLab 2 is placed
closer than approx. 50 cm (20”) to a wall,
and no closer to a corner than approx.
150 cm (60”) – shown by the medium grey
areas along the walls in the illustration.
FREE: Use this setting if BeoLab 2 is placed
more than approx. 50 cm (20”) from the
wall – shown by the light grey area in the
illustration.
The dimensions mentioned are guidelines only.
You may, of course, set the switch to any of
the three positions you prefer.
CORNER
WALL
FREE
~ 50 cm
20"
~ 150 cm
60"
Never place BeoLab 2 behind your listening
position. We recommend that you avoid
placing any of your loudspeakers in the area
inside the thin dotted line.