Bang & Olufsen BeoLab 2 - User Guide - Manual (Page 7)

7
Setup examples
Dolby Digital system:
> Connect one end of the cable to the socket
marked IN on BeoLab 2, and the other end
to the socket marked SUBWOOFER on your
Bang & Olufsen system.
> Connect your front set of speakers to the
sockets marked FRONT on your Bang &
Olufsen system.
> Connect your rear set of speakers to the
sockets marked REAR on your Bang &
Olufsen system.
Dolby Pro Logic system:
> Connect one end of the cable to the socket
marked IN on BeoLab 2, and the other end
to one of the sockets marked FRONT on your
Bang & Olufsen system.
> Connect your front set of speakers to the
sockets marked OUT on BeoLab 2.
> Connect your rear set of speakers to the
sockets marked REAR on your Bang &
Olufsen system.
Stereo system:
> Connect one end of the cable to the socket
marked IN on BeoLab 2, and the other end
to one of the speaker sockets on your Bang
& Olufsen system.
> Connect your left and right set of speakers
to the sockets marked OUT on BeoLab 2.
R L
R L
IN
SUBWOOFER
REAR REAR
FRONT FRONT
'Dolby Digital system'
R L
OUT OUT
IN
FRONT
REAR REAR
'Dolby Pro Logic system'
R L
OUT OUT
IN
'Stereo system'