Bang & Olufsen BeoLab 11 - User Guide - Manual (Page 6)

Connect your speaker system
Connect the subwoofer to your
system using a Bang & Olufsen
Power Link cable.
You gain access to the
subwoofer socket panel from
the bottom, see page 5.
For specific information about
the other speakers and units in
your Bang & Olufsen system,
refer to the Guides enclosed
with these products.
Speaker connections
On these two pages you can see
examples of two different setups.
Surround system:
The system has a dedicated
subwoofer socket, and all speakers
are connected directly to your
Bang & Olufsen system.
> Connect one end of the cable to
the socket marked POWER LINK
IN on the subwoofer, and the
other end to the subwoofer
socket on your Bang & Olufsen
system.
> Connect your other speakers to
the speaker sockets on your
Bang & Olufsen system.
> Select EXT. BASS MANAGEMENT,
see page 9.
Stereo system:
The left and right speakers are
connected to the subwoofer, and
the subwoofer is connected to your
Bang & Olufsen system.
> Connect one end of the cable to
the socket marked POWER LINK
IN on the subwoofer, and the
other end to one of the speaker
sockets on your Bang & Olufsen
system.
> Connect your other speakers to
the sockets marked POWER LINK
OUT on the subwoofer
> Select INT. BASS MANAGEMENT,
see page 9.
Connection to the mains
Connect the enclosed mains cord
to the socket marked
~
.
6