Bang & Olufsen BeoLab 11 - User Guide - Manual (Page 4)

Set up the subwoofer
We recommend that you follow
this procedure:
– Disconnect your system from the
mains supply.
– Place the subwoofer according to
the guidelines in ‘Adapt the
subwoofer to your setup’ (p. 8).
For information on how to fasten
the subwoofer to the optional
accessories, refer to the Guide
enclosed with the accessory.
– Set the switches to the correct
settings. This is explained in
‘Adapt the subwoofer to your
setup’ (pp. 8–9).
– Connect your speaker system as
described in ‘Connect your
speaker system’ (pp. 6–7).
– Connect the entire system to the
mains again.
Cautions
– Make sure that the subwoofer is
placed and connected in
accordance with the instructions
in this Guide. To prevent injury,
use Bang & Olufsen approved
stands and wall brackets only!
– The subwoofer can only be
switched off completely by
disconnecting it from the wall
socket.
– Do not obstruct the gap between
the subwoofer units.
– The subwoofer is designed for
indoor use in dry, domestic
environments only, and for use
within a temperature range of
10–40º C (50–105º F).
– Remember that all speakers in a
setup must be connected to a
mains outlet, and that they are
designed to be connected to the
mains at all times, as this allows
them to switch on automatically.
– Do not attempt to open the
subwoofer. Leave such operations
to qualified service personnel!
4
Location of the product
identification label.
Leave it to qualified personnel to
remove the shell as the subwoofer
may be damaged in the process.