Bang & Olufsen DVD 1 - User Guide - Manual (Page 19)

19
Change the country setting
Changing the COUNTRY setting in the
ACCESS CONTROL menu can affect the rating
levels used by Parental Control.
1 1 1 1 no off
Access control
Status window
Low power standby
Child lock
Parental level
Change country
Change code
To activate Parental Control…
> Press the blue button on Beo4 to bring up the
on-screen tool bar.
> Press ss or tt to move to OSD and ▼ to bring
up the Personal Preferences menu.
> Press ▼ to move down to and press tt to
move over to the Functions menu.
ACCESS CONTROL is already highlighted.
> Press tt to move to ENTER CODE.
> Use the number keys on Beo4 to enter your
code.
> Press ▼ to move down to PARENTAL LEVEL and
press tt to be able the choose a suitability level.
> Press ▲ or ▼ to choose a filter level between 1
(for most suitable) and 8 (for least suitable).
> Press GO to enter your choice and exit the
menus or press ss to move back through
previous menus.
DVD scenes rated higher than your chosen level
will not be shown. If alternative scenes at or
below your chosen level are available on the disc,
these will be shown instead. Set the filter level to
0 to deactivate Parental Control.
To change the country setting…
> Press the blue button on Beo4 to bring up the
on-screen tool bar.
> Press ss or tt to move to OSD and ▼ to bring
up the Personal Preferences menu.
> Press ▼ to move down to and press tt to
move over to the Functions menu.
ACCESS CONTROL is already highlighted.
> Press tt to move to ENTER CODE.
> Use the number keys on Beo4 to enter your
code.
> Press ▼ to move down to CHANGE COUNTRY
and press tt to be able the choose a country
setting.
> Press ▲ or ▼ to choose a country from the list.
> Press GO to enter your choice and exit the
menus or press ss to move back through
previous menus.
. . . .