Bang & Olufsen BeoVision 3-28 - User Guide - Manual (Page 47)

47
Cleaning the Beo4
Wipe the Beo4 remote control with a soft,
lint-free, firmly wrung cloth.
Changing the Beo4 batteries
When BATTERY appears in the Beo4 display, it
is time to change the batteries in the remote
control.
The Beo4 requires three batteries. We
recommend that you use Alkaline batteries
only (1.5 volt – size AAA). Replace the
batteries as shown on this page. Keep a finger
on top of the batteries until the lid is
replaced.
When you have replaced the batteries, you
must wait about 10 seconds until TV appears
in the display. The Beo4 remote control is
then ready for use.
1
2
3
1
2