Bang & Olufsen BeoVision 3-28 - User Guide - Manual (Page 36)

36
Set positions for the television to turn to
If your television is equipped with the
optional motorised stand or base, you
can turn it using the Beo4 remote
control.
Furthermore, you can program the
television to turn automatically to
face your favourite viewing position
when you switch on the television,
and turn away to a standby position
when you switch it off.
You can also turn your television by
hand.
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
TV ON
TV STANDBY
TV SETUP
back select GO
left right
store
GO
TV ON
TV STANDBY
STAND POSTIONS
.
..
. . . . . . . . . . ..
..
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press ▼ to highlight STAND POSITIONS.
> Press GO to bring up the STAND POSITIONS
menu.
> To store a stand position for when you switch
the television on, press ss or tt to turn the
television and place it according to your viewing
position.
To store a stand position for when the
television is switched off and in standby…
> Press ▼ to move to TV STANDBY.
> Press ss or tt to turn the television and place it
as you wish.
> Press GO to store your positions.
Choose one position for when you switch the
television on and one for when you switch it
off.
NOTE! For information about first-time installation
of the motorised stand or base, refer to the
chapter ‘First-time setup of your television’ on
page 28.