Atomos Ninja Star - Manual (Page 10)

Atomos Ninja Star – User Manual Edition 1: October 2014 10
The Ninja Star is controlled by a simple
user-friendly interface. Pictured right are the
main controls seen when the Ninja Star is
first powered up and there is a video input
connection.
Note: HDMI TRIGGER + Timecode will be auto
detected on the Ninja Star.
Record
• CODEC and Pulldown mode can be selected
by holding the previous and next buttons for
two seconds.
• The Record button can be used to start and
stop the recordings.
• The LEDs indicate the status of battery levels,
audio levels, time remaining on card, as well
as video options.
Using the Ninja Star
Record
OR
Record: Press to start/stop
recording (requires video lock)
Auto Record Trigger: Supported on
some Sony and Canon cameras
Play: Press to enter playback mode.
Hold for 2 seconds to select audio channel levels between HDMI and Analogue.
Change CODEC: Hold for 2 seconds to change CODEC
Change mode: Hold for 2 seconds to change pulldown removal setting
Hold both Rec + Play for 3 seconds to format CFast Card
Hold both Prev + Next for 2 seconds to Lock/Unlock the Ninja Star
panel buttons
Indicator LED light turns red
when recording
Record from:
Action Cam DSLR Mirrorless Video Camera
Record / Play / Prev / Next Playback
Indicator
Recording
Indicator
Battery Indicator
Time Remaining
Audio Levels
Recording Quality
Pulldown Status
Video Lock