AJA R20AD - Manual (Page 3)

1
3 AJA R20AD 10-bit Universal Decoder User Manual
Introduction
The AJA R20AD provides excellent-quality 10-bit conversion to SDI from
component or NTSC/PAL sources. The R20AD accepts YPbPr (SMPTE, EBU-N10),
Betacam, or RGB component inputs and NTSC/PAL or Y/C (S-Video) composite
inputs. Featured in the R20AD is a 4 Line Adaptive Comb Filter for high quality
decoding of composite sources. The comb filter can be switched to 2-line, or
notch modes for minimum delay requirements. The R20AD also accommodates
an optional FSG card (Frame Sync) for synchronizing the output video relative
to an external reference. NTSC/PAL configuration is automatic. Video format,
AGC, H/V blanking, and pedestal are all user configurable.
The R20AD is a 10.3” X 3.1” card, designed to plug into The AJA Video FR1-1 RU
frame and the AJA Video FR2-2 RU frame.
Features
R20AD Card Module, Side View
• Excellent quality 10-bit adaptive comb filter decoding
• Component (YPbPr, Betacam, RGB), PAL and NTSC Composite and Y/C (S
Video) inputs
• Four serial outputs (SMPTE 259M)
• Automatic NTSC/PAL selection
• Configurable pedestal and Comb filter
• 2X Oversampling
• Frame Sync/Genlock option with external reference inputs and full timing
adjustment
• Plug compatible with several other manufacturers’ video frames
User
Controls