AJA ROI - Manual (Page 13)

AJA ROI Converter v2.1 www.aja.com 13
A status field at the bottom of the screen shows if your application is connected and
communicating with the Mini-Converter.
When configuring the Mini-Converter, select it from the top pulldown, view the current
settings and change any values. Making a change communicates that new value to the
Mini-Converter’s non-volatile memory.
The Proxy Screen shows the current region of interest setting in green with the selection
pixel size at the bottom and the DVI input pixel size at the top.
Tabbed Screens
The Tabs delineate control screens with groups of controls for each type of task to be
performed.
The controls for the actual configuration parameters are specific to each Mini-Converter
type. Click on any of the tab buttons:
• Input Region of Interest
• Output
• Genlock
• Audio
• Update
• Info
The pane below the tabs will change to match your tab selection. Any changes you make
will be saved, overwriting previous settings.
Input Region of Interest Tab Screen
Click on the Input Region of Interest tab to view and make changes to the converter’s
input settings. Any changes made are immediately applied.